Jump to content

We're sorry for technical difficulties latest site upgrade caused.

We have now resolved the issue. 

If you're still experiencing issues, please clear your cache by following instructions on this link.  
Shall the issue persist after this step, welcome report it. 


This topic is now archived and is closed to further replies.


CAMWorks 2017 SP2 Build 0913

Recommended Posts

CAMWorks 2017 SP2 Build 0913


CAMWorks 2017 SP2 Build 0913 | 2.1 Gb

GeometricPLM has released an updated (build 0913) CAMWorks 2017 SP2, is a modern CAM programming solution that automates the creation of toolpaths inside SOLIDWORKS. Powering the SOLIDWORKS CAM, there is now a seamless associative path for all the SOLIDWORKS users machining and turning requirements.

Resolved CPR's CAMWorks 2017 SP2:

CW-74917 If an operation is copied and the tool diameter and tool comments are changed in the copied operation then, the tool comment in the parent operation also gets changed.
CW-74783 In the specific CAMWorks Virtual Machine Simulator, the user gets error messages when some of the key words are omitted.
CW-74782 In CAMWorks Virtual Machine Simulator, the ISO code of Heidenhain is not supported.
CW-74756 When Save Operation Plan command is executed for Multisurface feature with Spindle attribute as "Subspindle", crash is observed.
CW-74737 In CAMWorks Virtual Machine, the Heidenhain CYCL DEF 200 doesn't execute with the M99 line.
CW-74736 In CAMWorks Virtual Machine the command for single step through or Standard APT license is inactive.
CW-74628 In the Japanese language version of CAMWorks 2017 SP2, error is observed in Pattern Projection dialog box.
CW-74568 In CAMWorks 2017 SP2, the translation of the text string 'Volumill' is incorrect.
CW-74567 In the Japanese language version of CAMWorks 2017 SP2, error is observed in translation.
CW-74527 When Generate Operation Plan is done on counter bore hole features then, only the counter bore diameter is considered for generating the operations and not the hole diameter.
CW-74520 When the groove operations in Turn mode are posted, then the variable of TOOL_WIDTH for groove tool doesn't return with the correct values of groove tools.

Share this post

Link to post
Share on other sites

Elite7Hackers Netwok

Hack the imagination!

Support and inquiries

Open support ticket here or email us at [email protected]


Highlighted/recommended lights

  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Terms of Use.